Search for vitamaster pro 300 stepping machine drive cable - Page 61 | Fitness and Exercise Equipment Repair Parts

Catalog Part Matches (20484)

Showing Parts: 1501 - 1525 Of 20484 << Prev 59 \| 60 \| 61 \| 62 \| 63 Next >>

	13002312 No Longer Available Bar, Slide, Left Left weight bar slide used on Nautilus models: NT-SM1 - Smith Machine, NT-1610 - Smith Machine.
	3020390 No Longer Available Cable Assembly, 90" Cable assembly used on Life Fitness models: PL06 - Smith Machine
	47000318 No Longer Available Roller, Front Front roller. Please note this machine came with two different front rollers, please measure yours to be sure which will work for your machine. Thi. . .
	44000006 No Longer Available Controller Lower PCB power supply board. NOTE: This board has a ribbon cable connector, the newer upgraded boards have Teleco data cable connecter. You . . .
	6021204 No Longer Available Cable Used on WESY38320 - WEIDER PRO 3550 KIT, WESY38321 - WEIDER PRO 3550 SYSTEM
	76000106 No Longer Available Glideboard, One Piece Older version one piece glideboard assembly. There are two versions of pads for these machine. This is the original which is one solid piece. If your mach. . .
	10002080 No Longer Available Brake, Magnet Braking magnet assembly. This machine came with two styles of brakes, the only one that is available is pictured. If yours has the Servo motor sepa. . .
	38000487 No Longer Available Crossbar w/ HTR Contacts Handle bar assembly with HTR contacts, but without Polar capability. If you have a machine with Polar capability, you need to order 38000498. NOTE: The. . .
	7002061 No Longer Available FLY Kick Start Cable (4022) Fly 4022 - Kick start cable (2 per unit) for the Cybex Model 4022 Fly machine.
	34000068 No Longer Available Deck, SX PRO Deck for the Pace Ma ter SX PRO treadmill. NOTE: Use 34-ASXSSBED for SX PRO Soft Step Model
	10000955 Roller, Rear, 22.75 Rear roller used on True Fitness models: 300, 300P, 300HRC, 450 VINYL, 500/5, 400/3, 400/1, 360, TECH, 770, HT410, 90 SCHWINN. The shaft is 22 3/4 inch l. . . $155.20 / each
	39000280 Cable, Assembly 147 3/4" Cable, Assembly 147 3/4", This is the Leg Press and Pull Down Cable. $88.43 / each
	18000359 Cable Assembly 203 1/4" Cable Assembly PFT-200-2 This model used a few different lengths of cable. Please measure your cables carefully as a 20% restocking fee will apply to the. . . $160.34 / each
	6000042 Nut, Nylock Hex Nylock Hex Nut NOTE: The manufacturer has recently updated some of the cables on this machine. If you have a 6mm threaded stud, this is the correct par. . . $1.75 / each
	40000275 Cable Assembly, Hi-Lo, 358" This cable assembly no longer comes with the end brackets. You will need to use the brackets off your original cable or purchase catalog number 40000171 in the . . . $87.30 / each
	24006780 Cable. Rod 43" 43" Rod cable NOTE: These parts were originally sold as a pair and with some attachments on them. This cable is now sold each and you must order those at. . . $52.37 / each
	3007782 Cable, 114" 114" Cable Note: This cable has a 1" OD ball on each end. This creates a problem on some machines where the manufacturer used a larger opening. If your un. . . $50.93 / each
	49000058 Cable Assembly, 464" Cable Assembly *This cable no longer comes with the eyelet if you are needing the complete kit please order Catalog# 49034774 and Catalog# 49034773 as well* $81.47 / Each
	105000010 1/8" alum cable oval crimp 1/8" alum cable oval stop, used with 1/8" cable. Comes in packages of 10 $11.95 / pgk
	105000023 1/8" cable, shank ball stop 1/8" cable, shank ball stop. NOTE: The ID of this stop is 1/8" and is used on 1/8" stripped cable. $24.03 / Bg10
	58000184 Cable Assembly 162 1/4" There are 3 versions of this cable, please make sure you order the correct one. This cable has the 5/8" threaded shaft that inserts into the weight stack. $70.33 / Each
	7002412 Cable Assembly, 79" Lower Cable For Leg Press Note: This is the newer version that uses a roll (tension) pin to attach the cable to the top weight plate. $52.46 / each
	7017329 Brush, Motor, Kit, Lesson Drive motor brushes used on Cybex models: Elite 450T, Sport 510T, Sport + 515T, PRO 520T. NOTE: Lesson & McMillian motors were both used in these model. . . $73.44 / kit
	7004589 Cable Assembly, 220" Main cable used on Cybex model: 5604 cable crossover, 2 required per unit. $64.94 / each
	42000010 Cable Assembly, Secondary, 195" Secondary cable assembly used on the Parabody EX500 home gym. NOTE: This cable is for units which HAVE the PEC/DEC station. $70.81 / each
Showing Parts: 1501 - 1525 Of 20484 << Prev 59 \| 60 \| 61 \| 62 \| 63 Next >>

A - E

F - K

L - R

S - Z

Accessories

Belting

Electronics

Maintenance Items

Mechanical

Miscellaneous

Strength

Information

Customer Service

About Us

Connect