Catalog Part Matches (11713)
| 3085875 Cable, Assembly, 128" Cable assembly. NOTE: This cable is for the GS6 machines that have the Leg Press option. If you do NOT have the Leg Press option you will need 3018. . . | |||
| 58001178 Cable Assembly, 4055MM This machine came with two different styles of Weight stack cable. This cable has a ball stud on the end that attaches to the weight stack. If you have the bolt. . . | |||
| 40001850 Cable, Extension, Leg 134" Leg extension cable 134" 2005 VERSION ***NOTE*** There are several different versions of this cable. Please verify the length of the ca. . . | |||
| 39001234 Cable assembly, 181" Lat pulldown cable assembl 181" long. May have been used on units with "CAST" metal weight plates. NOTE: The manufacture used different sized cabll. . . | |||
| 67000484 Cable 32.18" Cable Row station 32.18" NOTE: This cable is used on the pre-pivoting cable clip row station | |||
| 39002562 Cable, Ab Crunch 153" Ab Crunch ***NOTE*** Two differrent length cables were used for this machine. Please verify the length of the cable you are replacing before . . . | |||
| 40001858 Cable Assembly, Leg Extension, 242" Leg extension cable for the Tuff Stuff Apollo450 gym. ***TWO DIFFERENT CABLES COULED HAVE BEEN USED. PLEASE MEASURE YOUR CABLE TO DETERMINE LENGTH NEEDED. . . | |||
| 40001859 Cable, Lat 161.25" Lat Cable 161.25" 2005 VERSION ***NOTE***There are several different versions of this cable. Please verify the length of the cable before ordering. | |||
| 40001860 Cable, Lat 165.25" Lat Cable 165.25" 2003 VERSION ***NOTE***There are several different versions of this cable. Please verify the length of the cable before ordering. | |||
| 40001861 Cable, Extension, Leg 131.5" Leg extension cable 131.5" 2003 VERSION ***NOTE***There are several different versions of this cable. Please verify the length of the cable before. . . | |||
| 22000201 No Longer Available Hub connection Hub connection speedometer driver. | |||
| 54005322 No Longer Available SPEEDOMETER CM526 | |||
| 54018736 No Longer Available SPEEDOMETER #9 | |||
| 5002347 Cable Assembly, Main, Zuma, 140" Zuma gym - Main cable assembly for the Pacific Fitness Zuma home gym. NOTE: Some of these units used a 147" long cable. Measure your old cable bef. . . | |||
| 39001598 Cable, Ab Crunch 161.5" Ab Crunch Cable ***NOTE*** Two differrent length cables were used for this machine. Please verify the length of the cable you are repl. . . | |||
| 39000564 Cable assembly, 169" Pulldown cable assembly. May have been used on units with "STEEL" weight plates. NOTE: The manufacture used different sized cables on some of. . . | |||
| 13001975 Cable, Shifter, 55" Shifter cable assembly. NOTE: Some cables changed sizes through the life of the machine. You need to measure your existing cable to know which part to or. . . | |||
| 5010553 Cable Assembly, 52" Cable assembly. (Note: There are two possible size cables for the Seated Tricep Machine depending on when machine was manufactured.) (This cable measures. . . | |||
| 67000721 Cable, Full Set, Version 1 Cable full set version 1 (original, up to March, 1993) Complete Cable Set - Version 1 NOTE: Butterfly arms do not ratchet, has a 4.5 inch low swivel pulley, ret. . . | |||
| 6063779 No Longer Available Cable Assembly, 189.5" 189.5" Cable assembly. NOTE: The threaded bolt end on this cable is a 12mm OD with 1.75mm thread pitch. This manufacture used several th. . . | |||
| 44000006 No Longer Available Controller Lower PCB power supply board. NOTE: This board has a ribbon cable connector, the newer upgraded boards have Teleco data cable connecter. You . . . | |||
| 18000359 Cable Assembly 203 1/4" Cable Assembly PFT-200-2 This model used a few different lengths of cable. Please measure your cables carefully as a 20% restocking fee will apply to the. . . | |||
| 39000280 Cable, Assembly 147 3/4" Cable, Assembly 147 3/4", This is the Leg Press and Pull Down Cable. | |||
| 47000572 Cable Assembly, Lat, 153" Lat cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The BALLS on this p. . . | |||
| 3007782 Cable, 114" 114" Cable Note: This cable has a 1" OD ball on each end. This creates a problem on some machines where the manufacturer used a larger opening. If your un. . . | |||
Showing Parts: 101 - 125 Of 11713 | |||