Catalog Part Matches (1933)
| 194000117 Screw 18-8 SS Flat Head Phillips Machine Screw 4-40 Thread, 5/8" Length | |||
| 62011893 End Cap endcap used on the right side of machine | |||
| 62011894 Endcap, Blemished end cap used on the right side of the machine ***Note*** Some Tabs may be broken off. These are not replaceable and covers may need additional glue. . . | |||
| 37000694 1/4-20 LG. ROUND SLOTTED MACHINE SCREW | |||
| 78000382 Hardware, Card, 2 of 2 Hardware card 2 of 2 for the�Change of Direction Machine | |||
| 6052350 MTR,DRIVE Drive motor. This is a NEW style upgraded motor designed to fit your machine. There is no longer a need for an external fan. | |||
| 22001153 Strap, Pedal Pedal strap, you must purchase two if you need one for each side. NOTE: This style of strap is the original on the machine. If your pedal has been upgr. . . | |||
| 6065820 Brake Pad Brake pad. The brake pads you receive may either have the clips that were on the original pads, or it may be held on by a spring and bolt. Both of these option. . . | |||
| 3000682 No Longer Available Pop pin assy Pop-pin assembly used on the Life Fitness Seated Leg Curl (SL-40) for the upper leg lock adjustment. | |||
| 58000277 Cable Pack This Cable pack includes both of the cables used on this machine. | |||
| 58000326 Cable assembly, 153" The Weight Stack Cable End on this machine has a threaded stud that attaches the Cable end to the Weight Stack. If your cable end is a Ball stud do not order th. . . | |||
| 58000325 Cable, Lat Pull Down, 150" The Weight Stack cable End on this machine has a Ball stud that attaches the Cable end to the Weight Stack. NOTE: If your cable end is a Threaded S. . . | |||
| 62002270 Controller, Motor Motor control board. NOTE: The original board for this machine is no longer available. The substitue part has slightly different dimensions from the orig. . . | |||
| 58001794 Arm, Crank, Left 17mm Left crank arm. This machine came with two different size cranks. Please measure yours before ordering. This part is 17 mm where it fits the axle. &. . . | |||
| 62036165 Linkage Kit V3 This is the version 3 linkage kit upgrade that includes Pedal Post, Lower Swing Arm, Pedal Post Connection and Pedal Post Set. Kit includes all parts and hardwa. . . | |||
| 62008498 Arm, Crank II Crank arm II Please check the notch placement on these crank arms to determine the correct one you need for your machine. These are not specific to. . . | |||
| 7016529 Oval Knob Handle, "T", Yellow Yellow "T" handle used on Cybex models: 4616, 4705 NOTE: If you have not used an upgrade kit on your machine, you can use 7023651 as a generic rep. . . | |||
| 62015033 Deck, Maintenance Free Maintenance free running deck board. Comes with extra brown piece already attached to the deck. ***NOTE*** There are two types o. . . | |||
| 62036166 Linkage Kit V3 This is the version 3 linkage kit upgrade that includes Pedal Post, Lower Swing Arm, Pedal Post Connection and Pedal Post Set. Kit includes all parts and hardwa. . . | |||
| 13001975 Cable, Shifter, 55" Shifter cable assembly. NOTE: Some cables changed sizes through the life of the machine. You need to measure your existing cable to know which part to or. . . | |||
| 13000958 Hardware, Pedal Pedal attachment hardware. NOTE: This hardware kit is for pre 2001 machines that have already been upgraded, or machines made after 2001. If your pre 200. . . | |||
| 54002360 Blemished Front Roller Blemished front roller used on a lot of keys products. These rollers have minor defects such as surface rust that should not affect the operation of the machine. . . | |||
| 7018810 Power cord, 250V 250V AC power cord. NOTE: This is the power cord that plugs into the AC adaptor only used on self powered units. Please compare the wall plug in to. . . | |||
| 62018937 Handle, Folding Folding handle **There was an upgrade on this part . If you current part is different than what is pictured, you will need to add the following parts to . . . | |||
| 6000977 Speed sensor Speed sensor. Some machines may have used a different style connector than the one pictured. Please look at the connector pictured on this part and ver. . . | |||
Showing Parts: 1776 - 1800 Of 1933 | |||