Catalog Part Matches (8634)
| 54000022 Treadbelt 123" Treadbelt 123" ***NOTE*** Two different sizes of treadbelt were used on this SCHWINN model. Please measure your old belt before ordering. &nbs. . . | |||
| 35005467 Arm, Pedal, Right Right pedal arm set. Newer style pedal arm set , the old arms are not available any longer. you can upgrade to this pedal arm but you will need the roller set c. . . | |||
| 4003305 Brake assembly Resistance brake assembly. NOTE: You can use 13000549 but you will nees to use your old spring rods as these 13000549 has longer spring rods. | |||
| 35005466 Arm, Pedal, Left Left Pedal Arm Newer style pedal arm set , the old arms are not available any longer. you can upgrade to this pedal arm but you will need the roller set c. . . | |||
| 44000307 Sensor, Speed Speed sensor. � NOTE:� You will have to splice this sensor into your old wire harness. | |||
| 44000277 Kit, Crank, Lower. This is a kit to convert the old style adjustable (BLACK) crank arms to the new design adjustable (SILVER) crank arms. NOTE: This kit includes both the l. . . | |||
| 62012215 Flywheel Axle Flywheel Axle Old Style 12mm | |||
| 35005558 Arm, Pedal, Newer Style Newer style pedal arm set made after 11/21/2008, the old arms are not available any longer. you can upgrade to this pedal arm but you will need the roller . . . | |||
| 39001786 Cable 184" Cable assembly 184" There has been an update on these cables. This is the new version which is 184" long. The old version is 174" long catalog# 39000246.&. . . | |||
| 49014216 Sleeve, Insert Insert Sleeve for H-bar-Old version | |||
| 5001202 Treadbelt M9.5sp - Treadbelt used on the old commerial Precor M9.5sp treadmill. NOTE: These treadbelts require lubrication on them. Failure to apply a n. . . | |||
| 62012526 Generator, Assembly, New V2 Version 2 generator assembly ***NOTE*** If upgrading from the old style generator, you must also replace the brake controller board on your machine. Cata. . . | |||
| 3005051 End Cap, 3/4" 3/4" End cap NOTE: Does not come with set screws. Order (2) 3003343 if you don't have your old ones. | |||
| 24010129 Controller, 110VAC REFURBISHED REFURBISHED 110 volt motor control board. NOTE: This is a new style board, if you have the old incline motor, you will need to order the jumper wire 17. . . | |||
| 50000576 Overlay Overlay New Version **Note if you have the old version this will not work with your machine** | |||
| 5005809 Controller, LPCA Motor control board WITHOUT software, used on Precor models. NOTE: You will need to move your EPROM from you old board into you new board. | |||
| 5005451 Needle bearing kit Flywheel shaft needle bearing upgrade kit, removes old bushing system and center shaft replaced by needle bearings. used on Precor C544 eliptical trainer, | |||
| 52004543 Controller, 110V, Refurbished REFURBISHED 110 volt motor control board. NOTE*** This is the old style board. | |||
| 13000687 No Longer Available Brake Pads, Old Style Brake shoe set. NOTE: This was the original style brake used on older Schwinn spinners. | |||
| 52003338 No Longer Available Bracket, Seat Old Style Seat bracket. | |||
| 5003699 No Longer Available Stop Button, Old Style Stop button assembly. NOTE: This Stop Button is No Longer Available. If you have this style of button, you will need to order the Retro Fit Kit number&. . . | |||
| 62036165 Linkage Kit V3 This is the version 3 linkage kit upgrade that includes Pedal Post, Lower Swing Arm, Pedal Post Connection and Pedal Post Set. Kit includes all parts and hardwa. . . | |||
| 62036166 Linkage Kit V3 This is the version 3 linkage kit upgrade that includes Pedal Post, Lower Swing Arm, Pedal Post Connection and Pedal Post Set. Kit includes all parts and hardwa. . . | |||
| 7007892 Cable Assembly, Pedal Return Tectrix ClimbMax stepper return cable for CM150. (Old mechanism S/N 150000 - 176195 & 300000 - 315498 & 400000 - 404640) | |||
| 98000023 Blemished Drive Motor New old stock drive motor that has been sitting on the shelf a little too long. | |||
Showing Parts: 426 - 450 Of 8634 | |||