- Home
- Brands
A - E
F - K
L - R
- Landice
- Life Fitness
- LifeSpan
- Lifestyler
- Livestrong
- Magnum
- Marpo Kinetics
- Matrix
- Merit Fitness
- Monark
- Nautilus Commercial (Core Fitness)
- Nautilus Residential
- NordicTrack®
- Nu-Step
- Octane
- PaceMaster
- Pacific Fitness
- Parabody
- Paramount
- Peloton
- Peloton
- Power Plate
- Precor
- Proform
- Quinton Commercial
- Quinton Medical
- Reebok (CCS)
- Reebok (Icon)
S - Z
- Schwinn
- SciFit
- Smooth (1984 - 2014)
- Smooth Fitness (2015+)
- Sole
- Spirit
- SportCraft
- SportsArt
- StairMaster
- Star Trac
- Sunny Health and Fitness
- Technogym
- Tempo Fitness
- TKO
- Total Gym
- Trimline
- Triumph
- True Fitness
- Tuff Stuff
- Tunturi
- Universal
- Vectra Fitness
- Vision Fitness
- Weider
- Weslo
- WiEMSPro North America
- Woodway
- X Series
- XPT
- Xterra
- XULT
- Yowza
- Types
- Catalog
- Orders and Returns
- Help
Catalog Part Matches (11672)
| 40001860 Cable, Lat 165.25" Lat Cable 165.25" 2003 VERSION ***NOTE***There are several different versions of this cable. Please verify the length of the cable before ordering. | |||
| 40001858 Cable Assembly, Leg Extension, 242" Leg extension cable for the Tuff Stuff Apollo450 gym. ***TWO DIFFERENT CABLES COULED HAVE BEEN USED. PLEASE MEASURE YOUR CABLE TO DETERMINE LENGTH NEEDED. . . | |||
| 40001861 Cable, Extension, Leg 131.5" Leg extension cable 131.5" 2003 VERSION ***NOTE***There are several different versions of this cable. Please verify the length of the cable before. . . | |||
| 39001598 Cable, Ab Crunch 161.5" Ab Crunch Cable ***NOTE*** Two differrent length cables were used for this machine. Please verify the length of the cable you are repl. . . | |||
| 13001975 Cable, Shifter, 55" Shifter cable assembly. NOTE: Some cables changed sizes through the life of the machine. You need to measure your existing cable to know which part to or. . . | |||
| 5010553 Cable Assembly, 52" Cable assembly. (Note: There are two possible size cables for the Seated Tricep Machine depending on when machine was manufactured.) (This cable measures. . . | |||
| 67000721 Cable, Full Set, Version 1 Cable full set version 1 (original, up to March, 1993) Complete Cable Set - Version 1 NOTE: Butterfly arms do not ratchet, has a 4.5 inch low swivel pulley, ret. . . | |||
| 6063779 No Longer Available Cable Assembly, 189.5" 189.5" Cable assembly. NOTE: The threaded bolt end on this cable is a 12mm OD with 1.75mm thread pitch. This manufacture used several th. . . | |||
| 44000006 No Longer Available Controller Lower PCB power supply board. NOTE: This board has a ribbon cable connector, the newer upgraded boards have Teleco data cable connecter. You . . . | |||
| 18000359 Cable Assembly 203 1/4" Cable Assembly PFT-200-2 This model used a few different lengths of cable. Please measure your cables carefully as a 20% restocking fee will apply to the. . . | |||
| 47000572 Cable Assembly, Lat, 153" Lat cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The BALLS on this p. . . | |||
| 39000196 Cable Assembly, 324" 324" Hi/Lo #1 cable assembly These cables do not come with the clevis pin. You will have to use the one off your old cable. | |||
| 39000280 Cable, Assembly 147 3/4" Cable, Assembly 147 3/4", This is the Leg Press and Pull Down Cable. | |||
| 3007782 Cable, 114" 114" Cable Note: This cable has a 1" OD ball on each end. This creates a problem on some machines where the manufacturer used a larger opening. If your un. . . | |||
| 105000010 1/8" alum cable oval crimp 1/8" alum cable oval stop, used with 1/8" cable. Comes in packages of 10 | |||
| 105000023 1/8" cable, shank ball stop 1/8" cable, shank ball stop. NOTE: The ID of this stop is 1/8" and is used on 1/8" stripped cable. | |||
| 58000184 Cable Assembly 162 1/4" There are 3 versions of this cable, please make sure you order the correct one. This cable has the 5/8" threaded shaft that inserts into the weight stack. | |||
| 7002412 Cable Assembly, 79" Lower Cable For Leg Press Note: This is the newer version that uses a roll (tension) pin to attach the cable to the top weight plate. | |||
| 47000887 Cable Assembly, Rod 151" Rod cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The b. . . | |||
| 7004589 Cable Assembly, 220" Main cable used on Cybex model: 5604 cable crossover, 2 required per unit. | |||
| 3018398 Cable Assembly, 103" Weight stack cable assembly. NOTE: This weight stack cable is used on units that do not have the leg extension units on their machine. | |||
| 40000275 Cable Assembly, Hi-Lo, 358" This cable assembly no longer comes with the end brackets. You will need to use the brackets off your original cable or purchase catalog number 40000171 in the . . . | |||
| 42000010 Cable Assembly, Secondary, 195" Secondary cable assembly used on the Parabody EX500 home gym. NOTE: This cable is for units which HAVE the PEC/DEC station. | |||
| 105000009 3/16" alum cable oval crimp 3/16" alum cable oval stop, used with 3/16" cable. Comes in packages of 10 | |||
| 24006780 Cable. Rod 43" 43" Rod cable NOTE: These parts were originally sold as a pair and with some attachments on them. This cable is now sold each and you must order those at. . . | |||
Showing Parts: 101 - 125 Of 11672 | |||
