NOTE: This item does not have a threaded hole into the axle. Some units were manufactured with a threaded hole in the axle and a screw to hold the pivot bearing in place. The drawings do not show this hole or the screw. If your unit currently has a threaded hole into the axle you can order 35001081 as a replacement.
Left or Right crank arm.
NOTE: This is the upgraded crank arm. The original crank arm used a retaining ring to hold the pivot tube on, this one uses a bolt and washer. The original crank arm...
Pivot Tube with bronze bushings.
NOTE: This is an upgraded part that cannot be used with the original crank arm. This part must be used with the upgraded crank arm 35001081. If you...
