  Safety Keys Weight Pins Lubricants Bike Parts |
Catalog Part Matches (2579)
| 24006153 Pin, Center, 3 Hole Center Pin Note: This part comes without screw holes. If your current unit has threaded holes, you would need to order the bracket 24006149 as well in . . . | |||
| 54000007 Fan, Motor, 5/8" Motor fan blade used on older PRO 1000, EC2500 treadmills. NOTE: There were 3 different motors used on these models .... they used different. . . | |||
| 6001005 Cable Assembly, Lat Pulldown, 189.5 Cable assembly. NOTE: The threaded bolt end on this cable is a 1/2 OD with 13 thread pitch. This manufacture used several thread sizes on thes. . . | |||
| 6005147 Controller, MC70 MC-70 motor control board. NOTE: When you order you will be charged our CORE CHARGE, a return form will be included with your order. When you return yo. . . | |||
| 56000213 Power Supply Cord This is the power cord for the new style 2 part adapter. If you are needing the adapter also please order 56000739. | |||
| 6000408 Safety Key Safety key NOTE: This part may come in Red or Black depending on our stock. Safety (stop) key with clip. | |||
| 43001539 Pin, Adjustment Adjustment pin. NOTE: The knobs on this part came in several different colors, you will recieve whatever color we currently have in stock. | |||
| 62010463 Bearing Bearing This is the part for Version 2. If your machine currently has the plastic spacer, these will not work for you machine. You will need . . . | |||
| 44000363 Pad, Seat, Back Seat back pad. ***Once Pad is NLA, you must order Catalog # 44000052 or 44000348 for replacement.*** This is a replacement seat and will. . . | |||
| 33000180 Console, PM3/PM4/PM5 PM3/PM4/PM5 monitor computer. NOTE: Order this part ONLY if you unit currently has a PM3, PM4, or PM5 if your unit does not yet have the PM3 order the up. . . | |||
| 17001349 Controller, 110VAC 110 volt motor control board. NOTE: This is a new style board, if you have the old incline motor, you will need to order the jumper wire 17001368. . . | |||
| 6045265 Knob, Adjustment Adjustment knob. NOTE: The handle on this part was made is several different colors. You will receive whichever color we currently have in stock. | |||
| 3020436 Cable Assembly, 315" Cable Assembly This machine came with several different size threaded ends. Please measure your cable ends. This has a 9/16" end, if yours is 1/2" . . . | |||
| 24001512 Pulley Pulley NOTE: Your unit may not need the attaching hardware that come with this part. | |||
| 5001527 Controller Motor control board (LCPA - lower electronics) used on Precor models. NOTE: This board has a 16 pin main connector. NOTE: Precor used several diff. . . | |||
| 6035927 Controller, REFURBISHED, MC70A REFURBISHED motor control board MC-70A. These parts have been repaired and tested. NOTE: When you order you will be charged our CORE CHARGE, a return for. . . | |||
| 39000183 Pad, Roller Foam roller pad. This pad has an ID of 7/8". If this is too small to fit onto your machine, do not order this part. | |||
| 6007564 Pad, Roller Foam roller pad. ***This is a replacement non-OEM part and may be shorter than the original pad on your machine*** | |||
| 27001663 Stepper Cable 21" Step cable for the Tunturi 401, 405, 406, 415, C416, and C440 steppers. 21" center to center on the bracket holes. NOTE: There were two different lengths. . . | |||
| 6044704 Bracket, Roller, Rear Rear roller bracket. NOTE: This part was made in several different colors. You will get what ever color we currently have in stock. | |||
| 35006716 Bearing-Pivot Tube Bearing-Pivot Tube NOTE: This bearing has been phased out on the updated crank arm/pivot tube assembly. If you are upgrading to the new assembly, you do . . . | |||
| 26000406 Switch, On/Off On / Off switch. Please note, you will get which ever switch we have in stock. Both the two and three pronged switches are acceptable. If you. . . | |||
| 5003524 Bearing, Pillow block Pillow block bearing used on Precor models: C546i Version 2 (AA32, AAAJ), C556i Version 2 (AXFJ, AYXJ), C576i (AEWE, AGJE). Note: These pillow blocks can. . . | |||
| 21000319 Motor, Drive, Lesson Drive motor. **NOTE** Depending on the configuration of your machine, the wires may need to be spliced for additional length. If you a. . . | |||
| 6006915 Controller, MC70A Motor controller MC-70A. NOTE: When you order you will be charged our CORE CHARGE, a return form will be included with your order. When you return your u. . . | |||
Showing Parts: 1851 - 1875 Of 2579 | |||
|
Copyright 1995-2015 Fitness Plus Equipment Services, Inc. All Rights Reserved. |