Catalog Part Matches (2579)
| 6087928 No Longer Available Power Board Control (power) board. You can try 6083056 which does not have a ground wire on it, we make not assurances that 6083056 will work on these models. . . . | |||
| 9000955 No Longer Available Overlay, Lower Overlay, Button. This part is no longer available as an individual part. This is included in the console cover assembly | |||
| 27000131 Roller with bearing Seat roller with bearing. You should replace all the wheels on your equipment if you are replacing this part. | |||
| 52004391 AC adaptor AC power adaptor NOTE: This is an upgraded version of the power adapter. If you have not upgraded your power input jack DO NOT order this part. All restocking a. . . | |||
| 6084278 Safety Key Safety key NOTE: This part was made in several different colors. You will received which ever color we currently have in stock. | |||
| 945000005 Pull Pin, Safety Safety pull pin with tether. NOTE: This part may be red, white or black, depending on what we have in stock today! | |||
| 10001947 Strap, Pedal, Set Pedal strap set. NOTE: These straps came from the factory with ONE hole on the inside, those straps are no longer available the replacements have 2 or . . . | |||
| 35006617 Pivot Tube Pivot tube with bushings NOTE: If your machine has the original style needle bearing you will also need to order a crank arm (catalog number 35004921) in o. . . | |||
| 3002680 Cable assembly, 172" Primary 172" cable assembly used on Parabody models. NOTE: Some machines used a 169" cable. Please measure the cable on your machine to ensure you rece. . . | |||
| 6072002 Safety Key Safety key NOTE: This part was made in several different colors. You will received which ever color we currently have in stock. | |||
| 42000019 Cable Assembly, 169" Main cable used on Parabody EX350 NOTE: Some units used a 172" cable, please measure the cable on your unit to ensure you get the correct part. | |||
| 44000343 Bushing, Flange Pivot bushing This is the original bushing for unit. Please check your version before ordering. This is 5/8" ID If your machine has been upg. . . | |||
| 56000816 Motor, Incline, Q47 This is just the motor itself. If you need the wire harness, please order separately. Please note: This is the new version of this motor. If you have the older . . . | |||
| 24002058 Controller, 110V 110 Volt motor control board. NOTE: This is a new style board, if you have the old incline motor, you will need to order the jumper wire 17001368 as we. . . | |||
| 6086281 Safety Key Safety key NOTE: This part was made in several different colors. You will received which ever color we currently have in stock. | |||
| 6049395 Bracket, Roller, Rear Rear roller bracket. NOTE: This part was made in several different colors. You will get what ever color we currently have in stock. | |||
| 6000042 Nut, Nylock Hex Nylock Hex Nut NOTE: The manufacturer has recently updated some of the cables on this machine. If you have a 6mm threaded stud, this is the correct par. . . | |||
| 6049196 Safety Key Safety key assembly. NOTE: This part was made in several different colors. You will receive which ever color we currently have in stock. | |||
| 945000001 Safety Pull Pin Safety key (tether) used on various Schwinn and Trimline models: 3300, 5450, 6100.2, 6110, 6110P, 6300.2, 6500.2, 6700.2, as well as those listed below. . . . | |||
| 24005001 Pull Pin Pull Pin NOTE: These pins are larger in diameter (now a 0.31" OD shaft)than the originals. They were upgraded to increase the strength of the pin. I. . . | |||
| 6004019 Bumper, Weight stack Weight stack cushion. Please note this original weight stack bumper is no longer available, some customers have found this an acceptable replacement, how. . . | |||
| 15001367 Treadbelt, OEM, Waxless OEM beltwith Star Trac logo, used on Waxless models. NOTE: This is the WAXLESS running belt for the 5 hp AC Pro Tread. This belt (and the deck) ARE NOT R. . . | |||
| 64132 Pad, Seat, Recumbent bike The seat is 15.5" wide and 11" front to back. The hole pattern on this bike seat is a 4 hole pattern. The holes are spaced 5.75" apart left to right . . . | |||
| 6004143 Controller, MC70 Motor controller, MC-70. NOTE: When you order you will be charged our CORE CHARGE, a return form will be included with your order. When you return your. . . | |||
| 56000242 Power Supply This is the old style full adapter assembly which has the power cord attached. If you prefer to upgrade to the new 2 part style you will need to order the power. . . | |||
Showing Parts: 1826 - 1850 Of 2579 | |||