Safety Keys

Weight Pins

Lubricants

Bike Parts

Join -

Cable Coated OD (?)

Cable Length - Pull-Point (?)
The Pull-Point is measured from end to end on the cable assembly at their functional point. This can be found by using the reference sheet pictured here to get the exact Pull-Point for your cable. Start at the Pull-Point of one end and measure to the other end's Pull-Point. Note: FitnessRepairParts.com does not offer the ability to custom-make a cable assembly.

End #1 (?)
The first end on a cable assembly. Use the reference sheet here to locate the correct end for your cable assembly. Locate the first end alphabetically and then by the dimensions needed. Note: The 13 in ends A & B are threads per inch. Note: FitnessRepairParts.com does not offer the ability to custom-make a cable assembly.

End #2 (?)
The second end of the cable assembly. Use the reference sheet here to locate the correct end for your cable assembly. Locate the second end by the dimensions needed. Note: The 13 in ends A and B are threads per inch. Note: FitnessRepairParts.com does not offer the ability to custom-make a cable assembly.

Attributes



Catalog > Strength > Cable Assemblies > Terms: total trainer 3000 [X]

Catalog Part Matches (3)  

Showing Parts: 1 - 3 Of 3
  40000344
Cable Assembly, 152"
Low pull cable assembly.   This cable is used on the older style Apollo 4 gyms with 6 cables total.
$139.48 / each
  18001110
Cable Assembly 200-1/4"
Cable Assembly 200-1/4" PFT-200-2 FUNCTIONAL TRAINER Heavy 2:1 RATIO  NOTE: This model used a few different lengths of cable. Please measure your cables ca. . .
$156.24 / each
  18001111
Cable assembly 304"
FUNCTIONAL TRAINER 4:1 RATIO Serial Number prior to(not including) PFT-24-0402001This model used a few different lengths of cable. Please measure your cables ca. . .
$186.66 / each

Showing Parts: 1 - 3 Of 3


Use Full Site


SSL Certificate Authority