Catalog Part Matches (618)
| 18002282 Cable Assembly, 126 1/8" Lat Cable Assembly | |||
| 58000184 Cable Assembly 162 1/4" There are 3 versions of this cable, please make sure you order the correct one. This cable has the 5/8" threaded shaft that inserts into the weight stack. | |||
| 7002412 Cable Assembly, 79" Lower Cable For Leg Press Note: This is the newer version that uses a roll (tension) pin to attach the cable to the top weight plate. | |||
| 47000887 Cable Assembly, Rod 151" Rod cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The b. . . | |||
| 7004589 Cable Assembly, 220" Main cable used on Cybex model: 5604 cable crossover, 2 required per unit. | |||
| 3018398 Cable Assembly, 103" Weight stack cable assembly. NOTE: This weight stack cable is used on units that do not have the leg extension units on their machine. | |||
| 40000275 Cable Assembly, Hi-Lo, 358" This cable assembly no longer comes with the end brackets. You will need to use the brackets off your original cable or purchase catalog number 40000171 in the . . . | |||
| 3020436 Cable Assembly, 315" Cable Assembly This machine came with several different size threaded ends. Please measure your cable ends. This has a 9/16" end, if yours is 1/2" . . . | |||
| 39000196 Cable Assembly, 324" 324" Hi/Lo #1 cable assembly These cables do not come with the clevis pin. You will have to use the one off your old cable. | |||
| 24006554 Cable Assembly, 323 Cable assembly NOTE: This cable does not come with the Ball Stop ends, they must be purchased separately. The ball stops are catalog 24008536. | |||
| 40000651 Cable assembly, 308" Cable assembly - 200 LB weight stack. NOTE: This cable is used on units having the optional 200 pound weight stack . If you purchased the 150 pound optio. . . | |||
| 3017038 Cable Assembly, 319" Cable assembly. NOTE: If unit has a removable attaching eye you can order just the cable, 3058899. | |||
| 5002348 Cable Assembly, 30" Multi-hip cable assembly for the Pacific Fitness Zuma home gym. NOTE: You may need to remove the pulleys in order to install this cable on the machine. | |||
| 58000329 Cable Assembly, 163" Cable assembly NOTE: There are 2 styles of this - look closely at the ends of your cable and the picture to make sure they are the same. | |||
| 3027556 Cable Assembly, Arm, 215" This cable has 2 ball shank ends. NOTE: This cable does NOT come with the Quick Connect ends. | |||
| 18001110 Cable Assembly 200-1/4" Cable Assembly 200-1/4" PFT-200-2 FUNCTIONAL TRAINER Heavy 2:1 RATIO NOTE: This model used a few different lengths of cable. Please measure your cables ca. . . | |||
| 40000344 Cable Assembly, 152" Low pull cable assembly. This cable is used on the older style Apollo 4 gyms with 6 cables total. | |||
| 67000281 Cable Assembly , Ab Crunch High Pulley, 96" Cable Assembly, Ab Crunch High Pulley Cable 96" | |||
| 6036993 Cable Assembly, 129" Cable Assembly. NOTE: This cable comes with one "blank" end. | |||
| 30000056 Cable Assembly, 205" Cable assembly used on Icarian cable cross over without "Hi-Low" adjustable slides. | |||
| 7002930 Cable Assembly, 60" Cable assembly used on Cybex Clasic 4212. NOTE: This cable is used on units that have set screws securing the cable to the weight stack. | |||
| 24006779 Cable Assembly, 52" This cable assembly does not come with the removable ball. You will have to use the removable ball on your original cable or order catalog number 47000507 in th. . . | |||
| 3020428 Cable Assembly, 197" Cable Assembly 197" Note: The length on this cable does not include the Eye Bolt. | |||
| 8000015 Cable Assembly, 76" Cable assembly used on Flex Fitness Assisted Chin & Dip. NOTE: Flex made two assisted chin & dip units. This cable is for the model which u. . . | |||
| 30000057 Cable assembly Cable for Icarian cable crossover, with adjustable "Hi-Low" slides, built before 2002. | |||
Showing Parts: 51 - 75 Of 618 | |||