Catalog Part Matches (2020)
| 49006412 AXLE EXERCISE ARM | |||
| 9000016 Treadbelt, Standard, 18" Wide, Long 18" Wide standard quality treadbelt for machines with a 52" Deck | |||
| 49009495 ARM LEG PAD EXERCISE | |||
| 49012567 EXERCISE ARM W/PULLEYS | |||
| 4015965 Connector, Rung Rung Connector This rung connector is only to be used on Jacobs Ladder machines that were made in the USA and have a 5 Number Serial Code.&n. . . | |||
| 49003104 HANDLE SHAFT ROM/EXERCISE SELECTOR | |||
| 6052465 Chart, Exercise Excercise Chart | |||
| 49006460 SHAFT ROM/EXERCISE SELECTOR | |||
| 12001159 Key Reader, Display Wire Display Wire Key Reader used on Technogym Top XT machines | |||
| 12001160 Key Reader, Display Wire Display Wire Key Reader used on Technogym Top XT machines | |||
| 49004439 AXLE EXERCISE ARM 93MM | |||
| 6009764 LIT,MANUAL,EXERCISE,IMBE4199 | |||
| 6009765 LIT,MANUAL,EXERCISE,IMBE5399 Used on | |||
| 49004464 AXLE LEG PAD EXERCISE ARM 78MM L | |||
| 49004469 SHAFT HORIZONTAL ROM/EXERCISE | |||
| 6013110 LIT,MANUAL,EXERCISE IETL15900, IETL15901, IMTL14900, IMTL15990, IMTL15991, IMTL15992, IMTL15993, IMTL19900, IMTL99000, IMTL99001 | |||
| 6013111 LIT,MANUAL,EXERCISE,NORDICTRAK Used on | |||
| 6013112 LIT,MANUAL,EXERCISE Used on | |||
| 49003723 POWER SWITCH EXERCISE BIKE (RED) | |||
| 72004824 Controller, TX6, Version 2 TX6 Controller (VERSION 2) ***ONLY TO BE USED ON MACHINES WITH SERIAL NUMBERS**** Black - Greater than X6BD400133 and Greater thanX6BA500001 White . . . | |||
| 62011877 endcap endcap used on the right side of machines | |||
| 13006116 Crank Arm, Pair Crank arm set For the Airdyne 3 & 4, you need to switch the left and right to be able to get these to line up. Left on the right side and . . . | |||
| 41000123 Cable Assembly, Squat Release Squat release cable used on Free Motion squat machines. NOTE: The cable you receive may be longer than your original, you will need to cut it. . . | |||
| 6057579 Pulley, Cable, 4" 4" Pulley with 3/8" bore. NOTE: The attaching hardware may not be needed on all machines. Simply dispose of the un-needed hardware. | |||
| 6017837 Pulley, Cable Cable pulley. NOTE: The attaching hardware is not used on all machines, if you don need the extra hardware simply dispose of the un-needed parts. | |||
Showing Parts: 1351 - 1375 Of 2020 | |||