Catalog Part Matches (1070)
| 6108568 RI, CONSOLE REPLACEMENT RI, CONSOLE REPLACEMENT | |||
| 6101444 RI - LINK ARM REPLACEMENT RI - LINK ARM REPLACEMENT | |||
| 6101446 RI, MAGNET REPLACEMENT RI, MAGNET REPLACEMENT | |||
| 6037055 Cable Assembly, 414" Cable assembly. NOTE: The manufacturer has recently updated this cable. If your original cable used a 6mm threaded end, you will need to order 6000007 . . . | |||
| 6021911 Cable Assembly, 228" Cable assembly 228". NOTE: This cable no longer comes with a ball that is removable. If you cannot install the cable without removing the ball, do not pu. . . | |||
| 6037044 Cable Assembly, 162" Cable Assembly. NOTE: The manufacturer has recently updated this cable. If your original cable used a 6mm threaded end, you will need to order 6000007 . . . | |||
| 6001005 Cable Assembly, Lat Pulldown, 189.5 Cable assembly. NOTE: The threaded bolt end on this cable is a 1/2 OD with 13 thread pitch. This manufacture used several thread sizes on thes. . . | |||
| 6074705 Cable Assembly, 141" Cable Assembly with attaching wieght shaft piece. NOTE: This cable comes with one "blank" end. The hardware for the blank end will come unattached to t. . . | |||
| 6013439 Cable Assembly, 115" 115" cable assembly. NOTE: Some of these models used a 120" lower cable and some used 115" cable please measure your cable before ordering th. . . | |||
| 6086242 Cable assembly, 115 Cable assembly 115 inches long. NOTE: Some of these models used a 120" lower cable and some used this 115" cable please measure your cable before order. . . | |||
| 6016445 Cable Assembly, 137" to 139" 137" to 139" cable assembly. NOTE: The manufacturer of this cable has a 2" tolerance on this cable, assuming there are adjustments on the unit. The cab. . . | |||
| 6021910 Cable Assembly, 101" Cable assembly used on models: IMSY52050, IMSY52160, IMSY52161, IMSY52162. NOTE: These units used a 75" long cable & 101" long cable measure . . . | |||
| 6063779 No Longer Available Cable Assembly, 189.5" 189.5" Cable assembly. NOTE: The threaded bolt end on this cable is a 12mm OD with 1.75mm thread pitch. This manufacture used several th. . . | |||
| 6055308 Choke Choke Note: You may need to alter the choke by splicing the wires to create the correct connections. If you the part is altered, it will not be accepted as a re. . . | |||
| 6057220 Choke Drive motor choke (inductor) Note: You may need to alter the choke by splicing the wires to create the correct connections. If you the part is altered, it . . . | |||
| 6027895 Mylar fix kit, 17" Mylar fix kit for replacing the mylar deck surface. Please note this is just the Mylar strip for replacement | |||
| 6022302 Treadbelt Treadbelt. NOTE: We strongly recommend you apply lubricant when you replace any new treadbelt. NOTE: The original belt on these units was a HEAV. . . | |||
| 6004019 Bumper, Weight stack Weight stack cushion. Please note this original weight stack bumper is no longer available, some customers have found this an acceptable replacement, how. . . | |||
| 6007564 Pad, Roller Foam roller pad. ***This is a replacement non-OEM part and may be shorter than the original pad on your machine*** | |||
| 6039797 Strap, Heartrate Replacement strap for heartrate transmitter | |||
| 6029518 Endcap, Round, External Endcap. NOTE: The original endcap was a square endcap. This endcap is round. This is a direct replacement from the manufacturer. | |||
| 6005153 Controller, MC70A Motor control board (MC-70A). NOTE: When you order you will be charged our CORE CHARGE, a return form will be included with your order. When you return y. . . | |||
| 6034603 Wire, Harness Wire harness display to controller. Please note, if your current wire harness has a 7 pin and a 3 pin plug on both sides, this is not an acceptable repla. . . | |||
| 6000415 Replacement Owner Manual Packe Used on | |||
| 6012227 Assembly,MTR/PUMP REPLACEMENT Used on IMHS61500 - IMAGE RENEW 615 KIT, IMHS63104 - IMAGE RENEW 631 **KIT** | |||