Catalog Part Matches (5290)
| 62010060 AC adaptor AC adaptor | |||
| 13001975 Cable, Shifter, 55" Shifter cable assembly. NOTE: Some cables changed sizes through the life of the machine. You need to measure your existing cable to know which part to or. . . | |||
| 3016805 Wire harness, Adaptor HR receiver wire harness adaptor. | |||
| 35004681 Radial Arm-This is the arm only, bushings, other parts need to be ordered separately Radial Arm-This is the arm only, bushings, other parts need to be ordered separately | |||
| 35001699 Faceplate Set-Software needs to be changed if need to use for T63 Faceplate Set-Software needs to be changed if need to use for T63 | |||
| 35005570 Audio Input or Output board (order 2 if need both) Audio Input or Output board (order 2 if need both) | |||
| 15016487 No Longer Available Board, Power Control LCD Power control board Note: This part is no longer available separately, if you need this part, you will need to replace the entire display console. You. . . | |||
| 44000052 Pad, Seat Bottom Seat bottom. This is a replacement seat and will fit exactly on most models it is listed for.If the seat holes are a bit off the original holes, you will . . . | |||
| 6055308 Choke Choke Note: You may need to alter the choke by splicing the wires to create the correct connections. If you the part is altered, it will not be accepted as a re. . . | |||
| 47000572 Cable Assembly, Lat, 153" Lat cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The BALLS on this p. . . | |||
| 6012984 Accessory Kit This accessory kit comes with 5 different safety keys, 2 applications of lubricant, cleaner, a towel, and a surge suppressor. NOTE: This kit comes with t. . . | |||
| 6057220 Choke Drive motor choke (inductor) Note: You may need to alter the choke by splicing the wires to create the correct connections. If you the part is altered, it . . . | |||
| 47000504 Cable Assembly, Rod, 169" Rod cable. The BALLS on this part are NOT REMOVEABLE, if you need removable ball stops, please don't order this part. | |||
| 5004691 Power cord Power cord. NOTE: This part may need to be altered to work with some of the machines listed below. We do not provide instruction for this. Please ensur. . . | |||
| 35006591 Pivot Tube, Bushings Pivot Tube with bronze bushings. NOTE: This is an upgraded part that cannot be used with the original crank arm. This part must be used with the upgrad. . . | |||
| 47000887 Cable Assembly, Rod 151" Rod cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The b. . . | |||
| 533000002 Controller Motor control board 110 VAC. Note: If you currently have a "square" controller and you are changing to this controller, the unit may need to be re-wire. . . | |||
| 15006187 AC Adaptor AC Adapter NOTE: US and Canada customers need to order Power Cord 15004737. This is power supply only. Adapter will work on voltages: 100-220vac | |||
| 17001896 Controller, 110V Motor control board, for 110 volt machines. Note: If you currently have a "square" controller and you are changing to this controller, the unit may nee. . . | |||
| 35001186 C-Clip Some of the machines listed with this part have been updated. Please call with your model and serial number to ensure this is the correct part for your eq. . . | |||
| 47000191 Roller, Rear, Kit Rear roller kit. NOTE: Some older treadclimber units had a smaller ID drive roller mounting brackets. The outer bearings on this part are 1.6" OD.&. . . | |||
| 44000154 Kit, Shaft, Jack Jack shaft assembly Note: This part has been upgraded to catalog number and is now sold as a kit. Also note, that if this part has not yet been. . . | |||
| 11000455 Foot, Solid Support Foot Clamp - Solid foot. These replace the Axi Shock Supension. Used on Landice models: 8700 LTD, LTD P, Club, and Club P, 8700 Sprint-VFX, SST-VFX, and PRG_VFX. . . | |||
| 17000692 Controller, Conversion Kit Motor control board conversion kit. Note: If you currently have a "square" controller and you are changing to this controller, the unit may need to be re. . . | |||
| 9000163 Controller Motor control board (combo). Note: If you currently have a "square" controller and you are changing to this controller, the unit may need to be re-wire. . . | |||
Showing Parts: 301 - 325 Of 5290 | |||