  Safety Keys Weight Pins Lubricants Bike Parts |
Catalog Part Matches (11896)
| 44000006 No Longer Available Controller Lower PCB power supply board. NOTE: This board has a ribbon cable connector, the newer upgraded boards have Teleco data cable connecter. You . . . | |||
| 18000359 Cable Assembly 203 1/4" Cable Assembly PFT-200-2 This model used a few different lengths of cable. Please measure your cables carefully as a 20% restocking fee will apply to the. . . | |||
| 47000572 Cable Assembly, Lat, 153" Lat cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The BALLS on this p. . . | |||
| 39000280 Cable, Assembly 147 3/4" Cable, Assembly 147 3/4", This is the Leg Press and Pull Down Cable. | |||
| 3007782 Cable, 114" 114" Cable Note: This cable has a 1" OD ball on each end. This creates a problem on some machines where the manufacturer used a larger opening. If your un. . . | |||
| 49000058 Cable Assembly, 464" Cable Assembly ***This cable no longer comes with the eyelet if you are needing the complete kit please order Catalog# 49034774 and Catalog# 49034773 as well*** | |||
| 105000010 1/8" alum cable oval crimp 1/8" alum cable oval stop, used with 1/8" cable. Comes in packages of 10 | |||
| 105000023 1/8" cable, shank ball stop 1/8" cable, shank ball stop. NOTE: The ID of this stop is 1/8" and is used on 1/8" stripped cable. | |||
| 58000184 Cable Assembly 162 1/4" There are 3 versions of this cable, please make sure you order the correct one. This cable has the 5/8" threaded shaft that inserts into the weight stack. | |||
| 7002412 Cable Assembly, 79" Lower Cable For Leg Press Note: This is the newer version that uses a roll (tension) pin to attach the cable to the top weight plate. | |||
| 47000887 Cable Assembly, Rod 151" Rod cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The b. . . | |||
| 35002622 Washer, Teflon, Split Split teflon washer. NOTE: This washer is split to allow easy installation. | |||
| 7004589 Cable Assembly, 220" Main cable used on Cybex model: 5604 cable crossover, 2 required per unit. | |||
| 52004569 Controller, 110V Motor control board 110 volt. Note: This part is NOT for use in units that have a Baldor drive motor. NOTE: Proper installation of these boards re. . . | |||
| 3018398 Cable Assembly, 103" Weight stack cable assembly. NOTE: This weight stack cable is used on units that do not have the leg extension units on their machine. | |||
| 21000128 Controller Motor control VSD card cage. NOTE: Proper installation of these boards require you to apply heat sink compond to the power transistor. Fail. . . | |||
| 40000275 Cable Assembly, Hi-Lo, 358" This cable assembly no longer comes with the end brackets. You will need to use the brackets off your original cable or purchase catalog number 40000171 in the . . . | |||
| 42000010 Cable Assembly, Secondary, 195" Secondary cable assembly used on the Parabody EX500 home gym. NOTE: This cable is for units which HAVE the PEC/DEC station. | |||
| 105000009 3/16" alum cable oval crimp 3/16" alum cable oval stop, used with 3/16" cable. Comes in packages of 10 | |||
| 24006780 Cable. Rod 43" 43" Rod cable NOTE: These parts were originally sold as a pair and with some attachments on them. This cable is now sold each and you must order those at. . . | |||
| 3020436 Cable Assembly, 315" Cable Assembly This machine came with several different size threaded ends. Please measure your cable ends. This has a 9/16" end, if yours is 1/2" . . . | |||
| 39000196 Cable Assembly, 324" 324" Hi/Lo #1 cable assembly These cables do not come with the clevis pin. You will have to use the one off your old cable. | |||
| 24006554 Cable Assembly, 323 Cable assembly NOTE: This cable does not come with the Ball Stop ends, they must be purchased separately. The ball stops are catalog 24008536. | |||
| 62028320 Controller, Motor Motor control board. NOTE: Proper installation of these boards require you to apply heat sink transfer compond to the power transistor. | |||
| 40000651 Cable assembly, 308" Cable assembly - 200 LB weight stack. NOTE: This cable is used on units having the optional 200 pound weight stack . If you purchased the 150 pound optio. . . | |||
Showing Parts: 401 - 425 Of 11896 | |||
|
Copyright 1995-2015 Fitness Plus Equipment Services, Inc. All Rights Reserved. |