Catalog Part Matches (694)
| 6020591 Belt, Drive Drive belt. This machine had two belts, this one has 8 ribs. If you need the 10 ribs, you will need to order. Catalog number 7008901 | |||
| 6065077 Controller, MC2100 MC-2100 motor control board. Please note this new controller may look different than your old controller. This is an upgraded MC2100 made to work f. . . | |||
| 6044170 Console, Display Display console. This machine had several different versions of displays. Please check the pictures of the back of the console to be sure they are compati. . . | |||
| 6037044 Cable Assembly, 162" Cable Assembly. NOTE: The manufacturer has recently updated this cable. If your original cable used a 6mm threaded end, you will need to order 6000007 . . . | |||
| 6052961 Treadbelt Treadbelt Please note, this machine came with two different treadbelt sizes. This is 20" x 112" NOTE: These treadbelts require lubricat. . . | |||
| 6000042 Nut, Nylock Hex Nylock Hex Nut NOTE: The manufacturer has recently updated some of the cables on this machine. If you have a 6mm threaded stud, this is the correct par. . . | |||
| 6057757 Controller, MC2100 Motor control board MC-2100. Please note this new controller may look different than your old controller. This is an upgraded MC2100 made to work f. . . | |||
| 7008901 Belt, Drive Drive Belt. This machine had two belts, this one has 10 ribs. If you need the 8 ribs, you will need to order. Catalog number 6020591 | |||
| 6043891 Motor, Resistance Resistance tension motor assembly. NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The cente. . . | |||
| 6019664 Pin, Locking Locking pin NOTE: This is not the weight stack pin for the machine. | |||
| 6074703 Controller, MC2100 MC-2100 motor control board Please note this new controller may look different than your old controller. This is an upgraded MC2100 made to work fo. . . | |||
| 6072015 Roller, Front Front drive roller This is an upgraded roller, the shafts are now 5.8". If your original was 1/2" you will need to remover the bushing before insta. . . | |||
| 6007564 Pad, Roller Foam roller pad. ***This is a replacement non-OEM part and may be shorter than the original pad on your machine*** | |||
| 6073957 Retainer, Key Machine retainer key. | |||
| 6020180 Leveler, Foot Machine leveling foot. | |||
| 6074705 Cable Assembly, 141" Cable Assembly with attaching wieght shaft piece. NOTE: This cable comes with one "blank" end. The hardware for the blank end will come unattached to t. . . | |||
| 6036813 Console, Display Display Console This machine had several different versions of displays. Please check the pictures of the back of the console to be sure they are c. . . | |||
| 6042159 Treadbelt Treadmill walking belt. NOTE: These treadbelts require lubrication on them. Failure to apply a new deck surface and coat of lubrication will void the war. . . | |||
| 6029408 Motor, Resistance Resistance motor. NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The center phillips screw . . . | |||
| 41000122 Handle, Release Release handle used on Free Motion Squat machine. | |||
| 6044565 Grip, Hand Hand grip. ***These will need to be cut to length as they will be longer than the original on the machine*** | |||
| 6009270 Guide rod, 74" Weight stack guide rod. NOTE: This part does not come with a hole drilled in it. Your machine may require this hole, and you may have to drill this hol. . . | |||
| 6001977 Guide rod, 72" 72" long weight stack guide rod. Note: This rod does not have screw holes in the top. If your machine has holes in the top of the guide rod, you will hav. . . | |||
| 6056550 Treadbelt Treadbelt. Please note, this machine came with two different treadbelt sizes. This is 17" x 105" NOTE: These treadbelts require lubrica. . . | |||
| 6005414 Motor, Drive Drive motor. This machine came with several different styles of motors, please verify before ordering. | |||
Showing Parts: 226 - 250 Of 694 | |||