Subcategory
Cable Assemblies (12)
Strength (8)
Bearings (2)
Pins (2)
Lubricants (1)

Attributes










Brands

Loading...

Availability

Search > Terms: Seated calf raise machine

Catalog Part Matches (1941)  

Showing Parts: 1526 - 1550 Of 1941
<< Prev 60 | 61 | 62 | 63 | 64 Next >>


  6005511
Motor, Drive
Drive motor. This is a NEW style upgraded motor designed to fit your machine.  There is no longer a need for an external fan, but the flywheel will need to. . .
$220.92 / each
  6075776
Motor, Drive
Drive motor.   This is a NEW style upgraded motor designed to fit your machine.  There is no longer a need for an external fan, but the flywheel will . . .
$224.55 / each
  10004339
Cable Assembly 134"
Lat puldown cable for the Paramount FL-33 Lat pulldown machine.
$166.36 / each
  6017191
Motor, Drive, Assembly
This is a NEW style upgraded motor designed to fit your machine.  There is no longer a need for an external fan, but the flywheel will need to be transferr. . .
$211.78 / each
  6003564
Motor, Drive, Assembly
Drive motor assembly.   This is a NEW style upgraded motor designed to fit your machine.  There is no longer a need for an external fan, but the flywh. . .
$227.62 / each
  6029408
Motor, Resistance
Resistance motor.   NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The center phillips screw . . .
$84.30 / each
  6084287
Motor, Drive
Drive motor.   This is a NEW style upgraded motor designed to fit your machine.  There is no longer a need for an external fan, but the flywheel will . . .
$229.51 / each
  6020180
Leveler, Foot
Machine leveling foot.
$6.29 / each
  6073957
Retainer, Key
Machine retainer key.
$5.85 / each
  40000978
Cable 2:1 Ratio
Cable 2:1 Ratio The 2-1 ratio machine will have one pulley at the top of each weight stack
$140.69 / Each
  3092811
Controller, Motor, Refurbished
REFURBISHED motor control board. This is for the domestic machine only.
$237.01 / each
+ $75.00 refundable core charge
  3000683
Stop/Bumper, Delt Arm, Rear
Rear stop/bumper delt arm ***NOTE*** There has been a manufactorer change and these are now slightly different and 1" longer overall. If needed to replace, plea. . .
$35.89 / each
  58000325
Cable, Lat Pull Down, 150"
The Weight Stack cable End on this machine has a Ball stud that attaches the Cable end to the Weight Stack.   NOTE:  If your cable end is a Threaded S. . .
$98.46 / each
  9000062
Switch, Power
Switch, Power ***NOTE***   This switch can come with 2 or 3 prongs. The third prong is only a ground. Therefore, the two or three prong will be interc. . .
$12.13 / each
  6074705
Cable Assembly, 141"
Cable Assembly with attaching wieght shaft piece.   NOTE: This cable comes with one "blank" end. The hardware for the blank end will come unattached to t. . .
$100.00 / each
  6002684
Motor, Drive, Assembly
Drive motor assembly   This is a NEW style upgraded motor designed to fit your machine.  There is no longer a need for an external fan, but the flywhe. . .
$229.53 / each
  9023031
Belt, Drive
Drive belt   Please note, this machine took two separte size belts.  Please measure if your belt is not 61" please order catalog number 52003006. . . .
$19.40 / each
  24003375
Cable Assembly, 271"
Low Pulley Cable Assembly   NOTE: The cable assembly you receive may not be able to be taken apart for routing on the machine. If you cannot route the cabl. . .
$67.32 / each
  24014156
Cable Assembly, Lat, 153", W/O Balls
Lat cable without removeable balls.   NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. There . . .
$47.26 / each
  41000122
Handle, Release
Release handle used on Free Motion Squat machine.
$25.10 / each
  6044565
Grip, Hand
Hand grip.   ***These will need to be cut to length as they will be longer than the original on the machine***
$22.02 / each
  9021503
Treadbelt, 128"
128" Running belt.   NOTE: The XT-10 Model Used two different sized belts. Please measure your and order the correct belt for your machine.   NOT. . .
$192.00 / each
  56001361
Wheel, Ramp
The Octane Pro 3700 machine used two different types of wheels. One was Blue or black and rounded on the edge (rolling surface) and was used on serial numbers n. . .
$15.56 / Each
  52007849
Roller, Front
Front roller.   * Please note, many of these machines used different size rollers. Please contact us with your serial number to be sure to you get the roll. . .
$178.47 / each
  40000979
Cable, Ratio 4:1
Cable Ratio 4:1 The 4-1 ratio machine will have two pulleys at the top of each weight stack  
$205.11 / each

Showing Parts: 1526 - 1550 Of 1941
<< Prev 60 | 61 | 62 | 63 | 64 Next >>


Use Full Site


SSL Certificate Authority