Catalog Part Matches (13195)
| 35007734 Cable Assembly Cable Assembly ***NOTE*** This cable no longer comes with the eyelet end. If you need the eyelet please purchase separately or via the cable . . . | |||
| 58000183 Cable Assembly 160 1/4" Cable assembly. NOTE: There are 3 versions of this cable, please make sure you order the correct one. This cable has the a steel metal ball. . . | |||
| 42000008 Cable Assembly, Primary 199.75" Primary cable assembly used on the Parabody EX500 home gym. NOTE: This cable is for units which HAVE set screws attaching the cable. | |||
| 6021910 Cable Assembly, 101" Cable assembly used on models: IMSY52050, IMSY52160, IMSY52161, IMSY52162. NOTE: These units used a 75" long cable & 101" long cable measure . . . | |||
| 40000339 Cable Assembly, 127" Leg Extension Cable 2007 MADE IN CHINA MACHINES. WITH BOTH 150 AND 200 lbs WEIGHT STACKS ***NOTE*** There are several different v. . . | |||
| 40000056 Cable Assembly, Leg Extension, 204" Leg extension cable for the Tuff Stuff Apollo 450 gym. ***TWO DIFFERENT CABLES COULED HAVE BEEN USED. PLEASE MEASURE YOUR CABLE TO DETERMINE LENGTH . . . | |||
| 3085965 Cable Assembly, 429" Cable assembly NOTE: This cable does not come with the removable hardware. You will need to remove these parts from your old cable or purchase them separa. . . | |||
| 67000371 Cable 28.18" Cable Assembly, Row Station Cable 28.18" NOTE: This cable is used on row station machines produced after December 1, 1993. | |||
| 3085875 Cable, Assembly, 128" Cable assembly. NOTE: This cable is for the GS6 machines that have the Leg Press option. If you do NOT have the Leg Press option you will need 3018. . . | |||
| 58001178 Cable Assembly, 4055MM This machine came with two different styles of Weight stack cable. This cable has a ball stud on the end that attaches to the weight stack. If you have the bolt. . . | |||
| 3009159 Weldment - LAT BAR Black WLDMT - LAT BAR Black | |||
| 24010961 Lat, Upper Upper lat tower | |||
| 6045151 Tower, Lat Lat Tower | |||
| 40001850 Cable, Extension, Leg 134" Leg extension cable 134" 2005 VERSION ***NOTE*** There are several different versions of this cable. Please verify the length of the ca. . . | |||
| 5018699 WELDMENT, LAT BAR WELDMENT, LAT BAR | |||
| 67000484 Cable 32.18" Cable Row station 32.18" NOTE: This cable is used on the pre-pivoting cable clip row station | |||
| 39002562 Cable, Ab Crunch 153" Ab Crunch ***NOTE*** Two differrent length cables were used for this machine. Please verify the length of the cable you are replacing before . . . | |||
| 15011127 ENDCAP, LAT PULL DOWN BAR ENDCAP, LAT PULL DOWN BAR | |||
| 3014469 Weldment - PSPD LAT BAR SHADOW GRAY WLDMT - PSPD LAT BAR SHADOW GRAY | |||
| 39000152 Pivot Shaft (Lat Lower Arm) Pivot Shaft (Lat Lower Arm) | |||
| 15006810 BAR, LAT PULL DOWN BAR, LAT PULL DOWN | |||
| 58001764 Bar, Lat Lat bar | |||
| 47000710 Tower, Lower, Lat Lower lat tower assembly. | |||
| 47000784 X2 Rear Lat Cross Member X2 Rear Lat Cross Member | |||
| 15011054 BAR, LAT PULL DOWN, HANDGRIP, BAR, LAT PULL DOWN, HANDGRIP, | |||
Showing Parts: 626 - 650 Of 13195 | |||