Catalog Part Matches (12935)
| 18000289 Cable Assembly, Crossover, 329" Crossover Cable Assembly for PFW-6000 329" | |||
| 43001510 Hardware Kit, MS-20 Cable Crossover Hardware Kit, MS-20 Cable Crossover | |||
| 47000050 Shock, Kit, Version 1 Shock used on Bowflex models: TC1000, TC3000, TC5000 treadclimbers. NOTE: Bowflex® TreadClimber® models TC1000, TC3000, and TC5000 were r. . . | |||
| 72000858 Board, Motor Control with Intellistep Motor Control Board This is the motor control board for the TR2000HRC with Intellistep. Intellostep means the machine Counts your steps as you are walking and s. . . | |||
| 39000829 Cable Assembly 36-1/16" Vertical bench cable assembly. NOTE: This cable came in two lengths. The older version of the machine took a 36-1/16" cable. The newer cable is 42". . . | |||
| 39001787 Cable assembly 42" #5 Vertical bench cable assembly. This cable came in two lengths. The older version of the machine took a 36-1/16" cable. The newer cable is 42" long. Verify th. . . | |||
| 32000001 Crossover, Rope Mulit-station gym - Crossover cord for Magnum gyms. 32' Section | |||
| 3000808 Pulley, Crossover Crossover pulley | |||
| 3004556 Bracket, Support, Crossover Crossover support bracket | |||
| 5010553 Cable Assembly, 52" Cable assembly. (Note: There are two possible size cables for the Seated Tricep Machine depending on when machine was manufactured.) (This cable measures. . . | |||
| 7005310 No Longer Available Cable Assembly, 305" 5649 Cable crossover - Main cable used on the Cybex cable crossover, 2 required per unit. | |||
| 3026201 MACHINED CABLE CROSSOVER MACHINED CABLE CROSSOVER | |||
| 3017755 CABLE CROSSOVER 1 OF 3 CABLE CROSSOVER 1 OF 3 | |||
| 3017756 CABLE CROSSOVER 2 OF 3 CABLE CROSSOVER 2 OF 3 | |||
| 3017757 CABLE CROSSOVER 3 OF 3 CABLE CROSSOVER 3 OF 3 | |||
| 3005007 SHIELD; CABLE CROSSOVER SHIELD; CABLE CROSSOVER | |||
| 15029589 Assembly, CABLE CROSSOVER, KIT Assembly, CABLE CROSSOVER, KIT | |||
| 40001113 Cable, Crossover Crossover Cable | |||
| 3020433 1/8 INCH CROSSOVER CABLE SUB 1/8 INCH CROSSOVER CABLE SUB | |||
| 58000326 Cable assembly, 153" The Weight Stack Cable End on this machine has a threaded stud that attaches the Cable end to the Weight Stack. If your cable end is a Ball stud do not order th. . . | |||
| 58000325 Cable, Lat Pull Down, 150" The Weight Stack cable End on this machine has a Ball stud that attaches the Cable end to the Weight Stack. NOTE: If your cable end is a Threaded S. . . | |||
| 3020436 Cable Assembly, 315" Cable Assembly This machine came with several different size threaded ends. Please measure your cable ends. This has a 9/16" end, if yours is 1/2" . . . | |||
| 40000219 Cable, Leg Press, Single Fulcrum Leg press cable single fulcrum. Please note this machine came with a single and double fulcrum. This cable is for the single fulcrum. If your machin. . . | |||
| 6037044 Cable Assembly, 162" Cable Assembly. NOTE: The manufacturer has recently updated this cable. If your original cable used a 6mm threaded end, you will need to order 6000007 . . . | |||
| 6037055 Cable Assembly, 414" Cable assembly. NOTE: The manufacturer has recently updated this cable. If your original cable used a 6mm threaded end, you will need to order 6000007 . . . | |||