Catalog Part Matches (6109)
| 47000191 Roller, Rear, Kit Rear roller kit. NOTE: Some older treadclimber units had a smaller ID drive roller mounting brackets. The outer bearings on this part are 1.6" OD.&. . . | |||
| 6050500 Roller, Front Front drive roller. Plastic bushing, this maybe required on your front roller if you have a 5/8" diameter shaft roller, currently in your unit. Catalog Number: . . . | |||
| 49008742 Roller, Rear Rear roller. NOTE: If you are upgrading to the new Roller the end caps may not fit after new roller replacement, due to longer length. | |||
| 15003935 Foot Assembly, Front, with wheels Front stablizer assembly. | |||
| 39000177 Pivot, Leg, Roller Leg roller pivot tube. Note: This part does not come with the roller pads attached order 39000183 if you need the roller pads also. | |||
| 5027125 ASSEMBLY, ROLLER, DRIVE ASSEMBLY, ROLLER, DRIVE, COMMERCIAL ***NOTE*** A trim base change occurred on 5/14/19 affecting the dr. roller and deck. TRM#s built prior to 5/13/19 nee. . . | |||
| 6035579 Bracket, CNSL MTG,GRNTX Used on models: WLEVEX09040 - WESLO AERO A5 BIKE | |||
| 6034589 BSHG, Plastic, 1.53X1.87X4.30 Used on models: WLEVEX09040 - WESLO AERO A5 BIKE | |||
| 641000002 No Longer Available Roller, Front, Fixed Front (drive) roller used on Trimline models 1100, 1100.2SR, 2200, 2250, 2300.1, 2400, 2450.1, 2650.1, 3300, 3350, 3500, 3600, 3650.1, 4000, 4100, 4600. . . . | |||
| 641000005 No Longer Available Roller, Front, Adjustable Front (drive) roller used on Trimline models 1100, 2200, 2250, 2400, 2650.2, 2650.2, 2650.3, 3300, 3350, 3500, 3600, 4000, 4100, 4600. NOTE: This front. . . | |||
| 6033435 SCREW,PHPNHMS,BlackZP,M4-.7x38 Used on models: NTCCBE19520 - NORDICTRACK PILATES WEIGHT BENCH | |||
| 41000544 Idler Roller Assembly (Front Roller) Idler Roller Assembly (Front Roller) | |||
| 49014516 ROLLER AXLE- Order E23 Roller Wheel Set ROLLER AXLE- Order E23 Roller Wheel Set | |||
| 6043892 Pad, Roller Leg roller pad. NOTE: The diameter of these rollers has had slight changes over the years. It is best to order two of these at a time to ensure that the . . . | |||
| 56000738 Wheel, Ramp The Octane Pro 3700 machine used two different types of wheels. One was Blue or black and rounded on the edge (rolling surface) and was used on serial numbers n. . . | |||
| 6016781 Wheel assembly, Transport Stablizer (transport) wheel assembly. NOTE: This is NOT the wheel that is used on the pedal arm you stride on. NOTE: These wheels were made . . . | |||
| 58000228 Wheel This wheel replaces the small black wheels on the LPH1000, LPH1200, WLPH1100, and GLPH1100. NOTE: Please note the black wheel are no longer availab. . . | |||
| 9001593 Roller, Rear Rear roller. Please note this machine came with two different size rollers. This roller is 25.5". | |||
| 6072015 Roller, Front Front drive roller This is an upgraded roller, the shafts are now 5.8". If your original was 1/2" you will need to remover the bushing before insta. . . | |||
| 13000345 Wheel with Bracket, Transport Assembly Wheel bracket assembly which holds the wheels used to move the Schwinn Air-Dyne bike. | |||
| 76000613 Wheel, Seat, Upgrade The original wheel is a White or Yellowish color wheel. This part is no longer available. You would need to order four Upgraded Seat Wheels for the machin. . . | |||
| 50000459 Bolt Bolt ***These are the bolt for the slider wheel. These bolts will only fit the new style wheel. If you have not upgraded the wheels yet please aslo . . . | |||
| 56001361 Wheel, Ramp The Octane Pro 3700 machine used two different types of wheels. One was Blue or black and rounded on the edge (rolling surface) and was used on serial numbers n. . . | |||
| 13000349 Fastener, Wheel Axle Push-on fastener for holding the wheels on the transport axle of the Schwinn Air-Dyne bike. | |||
| 52007849 Roller, Front Front roller. * Please note, many of these machines used different size rollers. Please contact us with your serial number to be sure to you get the roll. . . | |||
Showing Parts: 176 - 200 Of 6109 | |||