Display Console.

NOTE: If you have a CM560R or CM560U with the older display console identified with a white knob on the back (non user) side of the display, you must order other parts to upgrade the bike for use with the new display. The old display console had a 7 pin wire harness and a second connector for the RPM sensor. The new display console has a single 9 pin connector and the RPM sensor must be plugged into the 2 pin connector on the tension motor.

For the CM560R: 54002427, 54001413, and 54002426

For the CM560U: 54002557, 54001413, and 54002504