|
| ||||||||||
|
Roller, Rear
***NOTE*** Two differernt rear rollers were used on these machines. Please measure the distance of the rear roller bolt hole on the shaft. The center of this bolt hole is .43 inches from the end of the shaft.
| ||||||||||
Listed on the following equipment:
Precor - 932I VERTICAL TREAD, ASSEMBLED, 120 - (AXGX)
Precor - 932I VERTICAL TREAD, ASSEMBLED, 120 - (AXGX)
Precor - 946i VERTICAL TREAD, ASSEMBLED, 120 - (ATRX)
Precor - 946i VERTICAL TREAD, ASSEMBLED, 120V - (ATRX)
Precor - C932i - (AJXC)
Precor - C932i - (AXGT)
Precor - C932i - (AXGT)
Precor - C932i - (AYYT)
Precor - C946i - (A925)
Precor - C946i - (A925)
Precor - C946i - (AADB)
Precor - C946i - (AADB)
Precor - C946i - (AC57)
* Images may not be identical to part.