|
|
StairMaster - 4400PT | |
Catalog Number |
Part Name | Special Notes | ||
 | #40 chain master link | |||
(CS)Assy,Alt, Pulley,4400PT T2 | ||||
(CS)Assy,Old Neck,4400 PT,W/B | ||||
(CS)Cover,Mid,W/Decals,Gr,Ger | ||||
(CS)Flash,Program,Climb Sys,C3 | ||||
(CS)MAINFRAME,BISON,4400PT/CL | ||||
1/4 BEARING UPGRADE | ||||
40/42/44/4600 transmission | ||||
 | 4000PT Snap ring 1 | |||
 | 460CL Alternator pulley | |||
 | Alt brush, Prestolite Brown | |||
 | Alternator, Prestolite | |||
 | Alternator, W/Pulley | |||
Arm, Pedal, Left | ||||
 | Arm, Pedal, Right | |||
Assembly,Handle,Chr,4400 | ||||
ASSEMBLY.HUB/SHAFT.PRESSFIT | ||||
Assy, Main Cable, 4400/4200 | ||||
Assy,Main Cable,4400 PT,HM | ||||
Assy,Neck,4400 W/Grips,Inj | ||||
Assy,Pwr,Hrns,Console,C2 | ||||
Assy,Rail,Handrail,44/24,Black | ||||
Bearing, Sealed | ||||
 | Bearing, Thrust | |||
Bearing/Bushing - Plastic | ||||
 | Belt, Drive | |||
 | Belt, Drive cogged | |||
 | Belt, Drive, Alternator | |||
Bolt, .25-20x3.0,HX HD | ||||
Brace,Alternator,4400 PT/SP,WB | ||||
Brace,Alternator,W/Blk Pwdrct | ||||
Bracket Cover Mount Steppers | ||||
 | Bracket, Transmission | |||
Bushing - Level Arm - Plastic | ||||
 | Bushing, Lower Pedal Arm | |||
Cable - DC 8 3-PIN | ||||
CABLE.EXTENSION.3 PIN.DC.16 | ||||
CABLE.EXTENSION.3 PIN.DC.8 | ||||
Cap,End,Handrail Access,,44/24 | ||||
Cap,Round, .50 ID | ||||
CAP. FINISHING. 1650 LE C2 | ||||
Chain, steparm, return | ||||
Clamp,Handrail,4400/2400,Black | ||||
Clevis Pin | ||||
 | Console, Display | |||
 | Cover, Middle | |||
 | Cover, Middle, Black | |||
Cover, Neck, Left, Black | ||||
Cover, Neck, Right, Black | ||||
CVR,LH W/DECAL,4400PT,BL(CS) | ||||
CVR,LOW LH,SMALL DCL,INJ,44PT | ||||
Decal,Side Cover,Climbing Sys | ||||
DECAL.DISTRIBUTOR.U.K. | Contact Us for Price | |||
DECAL.HEART RATE | ||||
Diode, Assy, Field Diode Assembly-Alternator | ||||
No Longer Available Display console, C5 | ||||
 | Drive Chain | Longer drive chain used on units only having only 1 belt. |
||
 | Drive Chain | Shorter drive chain used on units having the ecentric hub and 2 belts. |
||
 | Drive Clutch Sprocket (L) | |||
 | Drive Clutch Sprocket (R) | |||
 | Drive Shaft Sprocket | |||
 | Eccentric Hub Assy. | |||
GRIP 3300/4400/4200 HANDLEBAR | ||||
H.S. GEAR ASSY.BISON | ||||
Heart Rate transmitter | ||||
Heart Rate transmitter, Coded | ||||
No Longer Available HR Receiver, C5 | ||||
 | Hub assembly, Drive | |||
 | Hub with Grease Fitting for Easy Maintenance | |||
Instrt,Install,Pedal Arm Shaft | ||||
Instruction,Handrail Accessory | ||||
 | Jack, Power input | |||
Jumper C2-C3 Consoles | ||||
Key, 3/16 Sq X 1 3/8 Long | ||||
KITS CVRS W/NEW NECK 44PT BLK | ||||
L.S. GEAR ASSY.BISON | ||||
Label,Warning,Pwr Connector | ||||
Leg Wrap | ||||
Leveler Foot, Octagonal | ||||
 | No Longer Available Leveling Arm | |||
Link,Master,#41 | ||||
 | Load resistor | |||
 | Lock nut | |||
M/Switch/Decal 4600 Tech Only | ||||
Manual, Owners | ||||
Nut, 5/16-18 NC Nylock | ||||
 | Nut, locking | |||
Nut,8-32 NC Hex Mach, | ||||
Nut,8-32 NC Nylon Insert | ||||
Nut,Lock,5/16-24,Step Shaft | ||||
NUT..375-16.LOW PROFILE.NYLOC | ||||
Owners manual | ||||
 | Pedal, Left | |||
 | Pedal, Right | |||
 | Pedal, Soft pad, Pair | |||
 | Pin, Hitch | |||
 | Plastic T Head Rivet | |||
Plug,Button | ||||
Power cord | ||||
Power Cord, 110V | ||||
 | Power supply (3 pin) | |||
No Longer Available Power Supply,Japan,3-Pin | ||||
PROGRAM CARD 4000/7000 C5 | ||||
Program Card 4400PT | ||||
PULLEY SPRING SHAFT-WELD REQ | ||||
Pulley, Belt | ||||
 | Pulley, Spring | |||
 | Pulley, Spring | |||
Pulley,Transmission,Poly-V | ||||
PULLEY. FLAT BELT W.S. | ||||
 | Reading Rack | |||
 | Reduction shaft bearing | |||
 | Resistor, Load | |||
 | Retainer | |||
 | Retainer | |||
 | Retainer | |||
Retainer - Pedal Chain | ||||
Ring Sensor,Chr,4400,3300 | ||||
Rivet Plastic Perm 7000PT | ||||
Roll Pin - 1st Reduction Shaft PIN. ROLL LWR REDUCTION SHAFT | Contact Us for Price | |||
Rubber Pad | ||||
Screw | ||||
 | Screw | |||
 | Screw - Set for Pulley | |||
Screw, .25-20NCx.75 Hex GR | ||||
Screw, .250-20 NCx63 Hex | ||||
Screw, .250-20x5.00 Hex HD CP | ||||
Screw, .312-18x1.75,Hex HD Cap | ||||
Screw, .312-18x3.00 Hex HD | ||||
Screw, 8-32 NC X 3/4 Slot | ||||
Screw,#10-24 X ,50 Soc,HD Cap | ||||
SCREW,.312-18X.75,HEX HD CAP | ||||
Screw,1/4-28X1/4,Flt Point Blk | ||||
Screw,375-16 X 4,50 Hex Head | ||||
Screw,5/16-18 X 1-1/4 Hex | ||||
SCREW. #6X3/8 PHIL TYPE T | ||||
SCREW..375-16X4.HEX HD CAP | ||||
Seals,Bison Transmission (CS) | ||||
SHAFT LEVELING ARM-WELD REQRD | ||||
 | Shaft, Drive assembly | |||
Shaft, First, Reduction | ||||
Shaft, Pedal arm | ||||
Shaft,Pedal,Snap Ring,1995 | ||||
SHAFT.ARM.PEDAL.PRESSFIT | ||||
 | Shock mount, Pedal | |||
 | Sleeve, Spring to chain | |||
SM 41/44 Upper Left Cover Gray | ||||
SM 41/44 Upper Right Cvr Gray | ||||
SM RIVET INJECTION MOLD COVER | ||||
SM Touch Up Paint Kit, Black | ||||
SM4400PT CVRS W/NECK GRAY | ||||
 | Snap ring | |||
Snap Ring, 17mm | ||||
Snap Ring,1/2,Hvy Dty | ||||
Snap Ring,3/8,Spring Pulley | ||||
Spacer, Alternator | ||||
Spacer,Alternator,4400 PT/CL | ||||
 | Spring, Return | |||
Sprocket Drive Transmission | ||||
Sprocket Pulley - 80 Tooth SPROCKET.8MM.HTD | Contact Us for Price | |||
 | Step arm master link | |||
 | Thrust Washer | |||
 | Transmission | |||
Tyrap, .14x11.0 | ||||
TYRAP.1/8 X 7.515 | ||||
 | Washer | |||
Washer, .688 ID X 125 Thick | ||||
 | Washer, Flat | |||
Washer, Flat | ||||
Washer, Spacer | ||||
 | Washer, SS | |||
 | Washer, Thurst | |||
Washer,#8 Int, Tooth Lock | ||||
Washer,1/4,Flat | ||||
Washer,5/8,Spring Pulley | ||||
Washer,Flat,SS, .633x.402 | ||||
Washer,Internal Tooth Lock | ||||
WASHER. FINISHING. 1650 LE. C2 | ||||
WASHER. SHOLDR.. .25 ID NYLON | ||||
WASHER. SHOULDER. 3/8 ID NYLON | ||||
WASHER.1/4 MED. LOCK | ||||
WASHER.5/16 MED LOCK | ||||
WASHER.NYLON..505x.812x.090 | ||||
Wire harness |
|
Home
| Order Status
| Brands
| Support
| Search
| Company
| FAQ
| Glossary of Terms
| Join
| Find A Servicer
| Contact Us
|