REFURBISHED lower PCA ---- Original 2nd generation lower electronic module for Precor 9.2, 9.20, 9.20s treadmills.
NOTE: This board has a 14 pin main connector.
NOTE: Precor used several different lower control boards during the 1990's. LOOK CLOSELY at these controllers PRIOR to placing your order! We will charge a restocking & testing fee if you order the incorrect part!
REPAIRED Motor control board used on Precor models: 9.05, 9.1, 9.10.
NOTE: Precor used several different lower control boards during the 1990's. LOOK CLOSELY at these three controllers PRIOR...
Motor control board used on Precor models: 9.20 (90), 9.20s (91), 9.2s (51). This is the newest controller for these models.
Note: When this is no longer available you will need to use...
This part is NO LONGER AVAILABLE. You cannot purchase this part.
Shipping damaged motor control board. The plastic tab that holds the wire harness connector in place is broken. If you can live with this minor damage you save money.
Orginal 2nd generation lower electronic module for Precor 9.2, 9.20, 9.20s treadmills.
NOTE: Precor used several different lower control boards during the 1990's. LOOK CLOSELY at these...
REFURBISHED Motor control board used on Precor models: 9.05, 9.1, 9.10.
NOTE: Precor used several different lower control boards during the 1990's. LOOK CLOSELY at these three...
REFURBISHED Motor control board used on early Precor residental units.
NOTE: Precor used several different lower control boards during the 1990's. LOOK CLOSELY at these three...
